Clear sky
Clear sky
64.4 °F
September 21, 2014
River Reporter Facebook pageTRR TwitterRSS Search Login

The Bill Principle


May 8, 2013

When we bought our house, “sustainability” wasn’t part of our everyday vocabulary. We did know that a 100-year-old house was likely to bankrupt us with heating bills unless we made serious changes. Other than new wiring, no major renovations had been undertaken since the 1960s, a plus since the scary vintage state of the house meant that we could afford to buy it. But we had a lot of work to do if we were going to be both snug and solvent.

My fantasies of choosing paint colors and bathroom tile took a back seat to insulating the walls and attic on a do-it-yourself budget. Soon, friends’ eyes were glazing over as my conversation reverted inevitably to the eccentricities of a folk-built house. Other people might describe vacation plans or the accomplishments of their children; we obsessed about R-value—the quality of conductive resistance that keeps heat from flowing through insulating material. We also needed to block cracks that allowed heat to escape from the house (air leakage), and the drafts that moved cold air through the interior (convection). Energy efficiency always starts with how we address these three issues in walls, floors and ceilings—the “envelope” of the building.

One day at the lumberyard, we got a bit of advice that we named in honor of the man who offered it: the Bill Principle. “Do what you can,” said Bill. “Every bit helps. If you can’t afford the best, settle for good and keep at it.” That turned out to be pretty good advice.

Working room to room as our budget allowed, we used high density fiberglass batts between the wall studs, then added a layer of oil-backed Polyisocyanurate foam, carefully taped at the seams. This brought the insulation to a respectable R-19 and addressed air leakage. In the attic, we achieved R-38 with multiple layers. Our first full winter in the house, we became relentless draft hunters, caulking around the window trim, adding insulation around electrical boxes and installing child-proof plugs in the outlets, all of which made a remarkable difference.